The recording process went very well i understood the routing and i got good signals into the software mixer this helped when it came to mixing down the finished recording
it was good to place different microphones on the drums and see the different levels from each mic
i managed to get a good separation from each mic that meant there was not too much noise spill from each mic this also made it easier to mix
2 what would you improve
I would spend more time on choosing the microphones for each job so i would test the microphones to make sure i got the best sound possible for each instruments, also i would like to spend more time comparing the different sound and quality between the condenser and the dynamic microphone.
I would need to spend time learning how to use the the software to improve on my mixing skills
at all times i had to make sure that i worked within the health and safety guidelines making sure all wires were safely put out of harms way and keeping the sound levels within safe levels, also we took plenty of breaks to avoid getting tired or straining our eyes...
ReplyDeleteThis was a very good exercise in recording and you picked up and understood the routing process immediately the recording was well executed and the application of the effects worked well . Good work today Kai